NC Machine Using By China Fire Hydrant Valve Manufacturers

Computer Numerical Control(NC) is a form of programmable automation in China Fire Hydrant Valve suppliers and Manufacturers machinining workshop,in which the processing equipment is controlled by means of numbers. Letters and others symbols, The  numbers, letters, and symbols are coded in an appropriate format to define a program for instructions for fire hydrant workpiece changes, the capability to change the program is what makes NC suitable for low volume and medium volume production for fire hydrant machining jobs, and it is much easier to write new program than to make major alternations to the processing equipment for Most China fire hydrant valve suppliers and manufacturers factory's machining workshop.

    The principle of numerical control was applied to the milling process for fire hydrant valve workpieces, and then use to the turning process for fire hydrant valve body workpieces.  drilling the fire hydrant flange holes,these job can make sure the fire hydrant valve quality at very higher level for China Fire Hydrant valve manufacturers exporting fire hydrant valve in worldwide have good reputation.

    the current NC equipments is relatively more mature in most China Fire hydrant valve manufacturers workshop. NC Centers.Many machines pocess multiple processing functions for machining fire hydrant valve component in China Fire hydrant valve  suppliers and manufacturers factory.Such as milling centers which can perform vertical and horizontal milling, Drilling, boring, reaming, slotting, shaping and turning process, of course, with a high capacity automated tooling library, CNC machines' functions can be considerably more abundant by China fire hydrant suppliers and  manufacturers in the future.

CNC MACHINING CENTER

CNC MACHINING CENTER

原创文章,转载请注明: 转载自DLFT CO.,LTD

本文链接地址: NC Machine Using By China Fire Hydrant Valve Manufacturers

#entry-meta
#post-1065-->

Most Fire Hydrant illegally abused in USA

In USA When a summer heat wave engulfs New York City, people seek the soothing embrace of water in whatever way they can: they swarm the neighborhood swimming pool; they visit the beach at Coney Island; they take multiple showers. People also tap into the city's water supply through some of its most vulnerable access points: fire hydrants. Wrenching open fire hydrants to frolic in the resulting spray is a summertime custom in cities and suburbs nation-wide—with often unconsidered consequences.   An opened fire hydrant in New York gushes 1,000 gallons of water a minute, draining the same reservoirs that supply kitchens, bathrooms, and—of course—fire hoses. "It's illegal for private citizens to open fire hydrants on their own," says Farrell Sklerov, a spokesman for the Department of Environmental Protection (DEP). "What people are supposed to do is ask for a spray cap from their local firehouse."   Free of charge, NYC firemen will install or lend out perforated caps that cut down a fire hydrant's gushing to 25 gallons per minute, while still providing constant jets of water for the hot and bothered. The caps help prevent water pressure from dropping dramatically in nearby homes and buildings.   "One open fire hydrant on a block will probably not impact water pressure that much," Sklerov explains, "but a significant amount of open fire hydrants impacts water pressure to the point that we get tons of 311 complains." During the July 5–7 heat wave, the DEP received so many 311 hotline complaints about low water pressure that they launched a fleet of teams to shut down more than 1400 opened fire hydrants each day. The city maintains 107,000 fire hydrants throughout the five boroughs.   Sometimes, illegally opened fire hydrants have more dire consequences. The force with which the fire hydrants spout can catch people off guard, knocking them into harm's way. In June 1994, a 3-year-old girl playing in front of an open fire hydrant in Manhattan died after the gushing water flung her into the path of an oncoming sanitation truck, The New York Times reported. Such cases are fortunately rare. The primary objection to opening fire hydrants without spray caps is the sheer waste of resources. In the case of New York, opening fire hydrants illegally doesn't waste much energy, because water travels to the city almost solely by gravity and New York is one of only a handful of major cities that don't rely on expensive artificial filtration systems, since the majority of the city's water comes from naturally filtered and protected sources. For most cities and suburbs, however, uncapped fire hydrants waste precious water and energy—especially during heat waves and droughts. This summer's June was the driest June on record for New York City since June 1999 and, as of July 16, the reservoirs were at 86.4 percent of their capacity, the DEP told The New York Times. Usually, reservoirs are at 93.4 percent capacity in mid-July.   "We understand people want to stay cool," Sklerov says, "but there's an appropriate way to do it: go to local firehouse and they'll hook up a spray cap for you."Technology might facilitate water conservation as well. Some companies are working on a new generation of intelligent fire hydrants that perpetually monitor water usage and sound the alarm if someone tries to open fire hydrant without permission. Smart fire Hydrant, currently in predevelopment, will wirelessly transmit data about leakages and tampering. And the Mi. fire Hydrant by Mueller Systems, recently introduced at the American Waterworks Association trade show, can similarly store and send information about leaks, backflow and other maintenance issues.But Sklerov says the DEP is not currently looking to deploy smart fire hydrants, because the current methods of identifying and resolving illegally opened fire hydrants work just fine.

原创文章,转载请注明: 转载自DLFT CO.,LTD

本文链接地址: Most Fire Hydrant illegally abused in USA

Posted in FIRE HYDRANT | Tagged

China Fire Hydrant valve manufacturers machining equipments

China Fire hydrant suppliers and manufacturers'basic machines for fire hydrant valve machining is Lathes, The basic machines that are designed primarily to do turning, facing and boring are call lathes. Very little turning is done on other type of machine tool, and as you know the fire hydrant valve upper body, fire hydrant valve lower body and fire hydrant valve middle barrel's flange face all need turning machining,And none can do it with quality facility.Because lath can do boring, facing, drilling and reaming in addition to turning, all these function of the lathe decide that fire hydrant valve suppliers and manufacturers' work main machining equipment for machining fire hydrant valve is lathes.lathes versatility permits several operations to be performed with a single setup of the fire hydrant valve workpiece. this accounts for fact that lathes of various types are more widely used in manufacturing than any others machine tool at fire hydrant valve componets machining job.

Lathes in various forms have existed for more than two thousand years. Modern lathes date from about 1797. When Henry Maudsley developed on with a leadscrew. It provided controlled. mechanical feed of the tool. this ingenious Englishman also developed a changegear system that could connect the motions of the spindle and leadscrew and thus enable threads to be cut.this used for fire hydrant valve upper body ourlet inside thread machining Job and it works very well.so now in China. all China fire hydrant valve suppliers and manufacturers works main machining equipments is lathes.

fire hydrant manufacturers in china

fire hydrant manufacturers in china

原创文章,转载请注明: 转载自DLFT CO.,LTD

本文链接地址: China Fire Hydrant valve manufacturers machining equipments

Posted in FIRE HYDRANT | Tagged

Strength And Ductility of Material for fire hydrant valve

Capacity of fire hydrant valve component material is related to the most severe service condition it can sustain without a change which will prevent the fire hydrant valve component from continuing its intended function, in most case, loads are the main manifestations of capacity. to assess the load-carrying capacity of the fire hydrant valve component castings suppliers material, here we shall discuss the capacity of engineering materials to sustain loads.

A most informative material test for fire hydrant valve component castings is the simple tensile test. A specimen in the form of a cylindrical bar, machined to a displacement(extension) are recorded. the resulting load-displacement curve for a typical gray iron casting material for cast iron fire hydrant valve component. Assuming constant cross-section of the rod. the same curve related stress and strain.  the curve of this figure does not correspond exactly to the real stress-strain relationship because of the way it is made, that is, we measure force and displacement at interpret them as stress and strain based on the initial length and the initial cross section of the test specimen, these properties continusly change during the experiment therefor the result of such a test will have only a formal value.

For Most material used for  China fire hydrant valve component casting design from this diagram we observe a linear stress strain relationship which extends upto some point, and shortly thereafter one can observe an increasing deformation without a proportional increase in the load and the stress, this roughtly corresponds to the point that we have s substantial yielding of the material and we call this the "yield point". the corresponding stree is called the "yield strength" of the material of fire hydrant valve component casting, we have been intentionally vague in the precise definition of the yield point owing to the fact that in most materials of  fire hydrant component castings it is not possible to identify a simple point where we have the transition from elastic to plastic behavior, in fact in most fire hydrant component materials this transition is not abrupt and it is a matter of definition to specify the yield point.usually we define the yield point as the point where a certain percentage of plastic deformation remain after load.

fire hydrant castings

fire hydrant castings

原创文章,转载请注明: 转载自DLFT CO.,LTD

本文链接地址: Strength And Ductility of Material for fire hydrant valve

Posted in FIRE HYDRANT | Tagged

Fire hydrant Sand Casting industry In China

Since China opening door to the outsid world thirty years ago. China Casting industry have develop very quickly. China Export lot of Castings products abroad since then.in these exporting castings.

the Fire hydrant valve castings made according to importers' drawings, samples or patterns also have get very big improved.including Green Sand mold casting for fire hydrant body, cap, valve body . quality are very good to importers' satisfy made by china fire hydrant castings suppliers.

 Green Sand general consists of Silica sand and Additives coated by rubbing the sand grains together with clay uniformly wetted with water, more stable and refractory sands have been developed, such as fused silica, zircon, and mullite, which replace lower cost silica sand and have only 2% linear expansion at ferrous metal temperatures. also, relatively unstable water and clay bonds are being replaced with Synthetic resins, which are much more stable at elevated temperatures.

Green sand molding is used to produce fire hydrant valve castings, not only for iron castings fire hydrant parts, also for bronze fire hydrant coupling castings to make sure the castings appearance smoothly and looking very good.

DLFT CO LTD will do our best to make sure our  delivery to importers high quality fire hydrant valve castings as better as we can.

fire-hydrants-made-by-china-fire-hydrant-manufacturers

fire-hydrants-made-by-china-fire-hydrant-manufacturers

原创文章,转载请注明: 转载自DLFT CO.,LTD

本文链接地址: Fire hydrant Sand Casting industry In China