Operator manual for bench vise with swivel base

It is important that your read the entire bench manual supplied by the bench vise manufacturers or bench vise suppliers to become familiar with the bench vise with swivel base.

Before uses of bench vise with swivel base Make sure the bench vise is securely mounted before using,and Please check for if have any damaged parts on the bench vise.

the bench vise with swivel base comes completely assembled.  Before proceeding the bench vise, wipe down the swivel bench vise with a degreasing solution or dish soap and water to remove any packaging grease on your bench vise.

Swivel bench vise mounting options:

Your swivel bench vise comes with mounting holes on the Base Foot.  Use the appropriate hardware to secure the swivel bench vise to your workbench. 

Before assembling your bench vise with swivel base, be sure that you have all parts described in the bench vise parts list supplied by bench vise manufacturers or suppliers in packing carton

Assemble attachments based on the intended use of the tool.

Mounting the swivel bench vise to a Wooden Workbench:

1.Measure the thickness of your workbench. To securely mount swivel bench vise to a wooden workbench, mount a wood washer underneath the mounting points for the bench vise in order to add strength.

2.Purchase three or four bench vise mounting bolts, nuts, and flat washers the appropriate length of your workbench and add one inch of length to the bolts to make up for the extra inch of the bench vise

3.Mark and drill the holes through the workbench, using the base as a template, for the mounting tabs on the base of the swivel bench vise.

4.Position the vise on the workbench and line up the holes drilled in step 3 with the holes in the mounting tabs.

5.Insert the Bolts into the mounting tabs and through the workbench.

Mounting the swivel bench vise to a metal Workbench:

1.Measure the thickness of your workbench. To securely mount your swivel bench vise to a metal workbench, mount an thick reinforcing plate underneath the mounting points when step 6 is performed.

2.Purchase three or four bench vise mounting bolts, nuts and flat washers that are the appropriate length for the thickness of the workbench. and add one inch of length to the bolts to make up for the extra inch of the bench vise.

3.Mark and drill the holes through the workbench, using the base as a template, for the mounting tabs on the base of the swivel bench vise.

4.Mark and drill the reinforcing plate, using the base of the bench vise as a template.

5. Position the vise on the workbench and line up the holes drilled in step 3 with the holes in the mounting tabs.

6.Insert bolts into the mounting tabs, and through the workbench (Remember to attach the reinforcing plate underneath the workbench, then thread on the nuts and tighten the bolts)

Clamping:

1.Open the bench vise with swivel base by turning the handle counterclockwise, until you have l/4" of space between your material and each jaw of the bench vise.

2.Hold the material between the jaws while you slowly tighten the bench vise by turning the handle clockwise. When your materials snug between the jaws, stop tightening.

3.Tighten the bench vise until you can no longer move the material you are working on.  do not over-tightening.

4.When finished working on the material, turn the handle counterclockwise. This will release the material from the bench vise.

Swivel base:

When the material is securely clamped in the bench vise, decide if you need to rotate the bench vise to allow better and safer access to material while working.  lf you need to change the position of the swivel bench vise, please follow the steps below.

1.Locate the Locking Clamps one to each side of the bench vise with swivel base.

2.Unlock each Locking Clamp lever by turning it counterclockwise.

3.Swivel the vise until you have better and safer access to your material

4.Lock each Locking Clamp lever by turning it clockwise until tight.

workbench with swivel bench vise

workbench with swivel bench vise

 

 

 

 

 

 

 

 

 

 

 

Related Reading

china bench vises manufacturers face tough competition around the worlds

Heavy Duty Bench Vises

American Type Bench Vises

Multi-Purpose Bench Vises

GS TUV VPA Approved Bench Vises

England Type Vises

Light Duty Bench Vises

Japan Type Bench Vises

Steel Bench Vises

Table Vises

Other Vises

the key to bench vise mounting

原创文章,转载请注明: 转载自DLFT CO.,LTD

本文链接地址: Operator manual for bench vise with swivel base